Thermal fluid heater for hoga pot stillsThe electrically operated Hogaboiler27, is a thermal oil heater specially designed for Hoga pot stills but not limited to. Pot still must be equipped with internal heating coils. Easy to operate. easy to maintain, long life, efficient and economical. Not all distilleries have the 3 phase power facility, and you might think of it as an expensive option. Not true. As soon as the oil reaches a temperature of 90ºC, following a very simple manual operation (it can be automatized) the temperature will remain in the fixed value, consuming only 12kW per hour.
Dimensions of the Hogaboiler27 in millimetres; 1700x970x2080 (HxWxL) - Weight; 550 kg
Power: 27.75kW Volts: 3X400V+N+PE40 AMP - 50HzAvailable in 60Hz
Sound level 70dB or less
50 liters in the tank80 liters full load
P: IP55 Power: 0,75kWFlow: 5m3/h to1,1m3/h
CE Conformity:The equipment, a three-part projectfrom LOGITRON, EQUIPROIN andHOGA COMPANY, is manufacturedin accordance with the EC Directives; 2006/42/EC and 2014/EU.DL 103/2008,EN 12100:2010and comply with the following Standards; NP EN 61439-1, NP EN 61439-2, NP 61439-3.
Starting: On a clean and firm floor, please install the hogaboiler27. Fill the expansion tank with 80liters (50L for the tank plus 30 liters for the plumbing), Just turn the Command One ON in the switchboard. Interactive board below will give you pertinent details about what you may expect fromHogaboiler27.
All welded construction
Less 15 PSIG
TUBING; Rockwool insulation with steel jacket
EXPANSION TANK; Mineral wool insulation withstainless steel jacket.
HEATERS; Stainless steel 316 grade inside, AISI404 on the outside